G9SX-GS/A4EG

Features

Umschaltmodul

The safety controller to support maintenance mode and normal operation mode in a safe way.

  • Zwei Betriebsarten zur Unterstützung der automatischen Umschaltung in Anwendungen, wo Maschine und Bediener zusammenarbeiten und manuelles Umschalten in Anwendungen mit Beschränkungen beim Betrieb, wie z.B. Wartung
  • Eindeutige LED-Diagnose aller Ein- und Ausgänge
  • Einsetzbar bis Kategorie 4 gemäß EN 954-1
Spezifikationen & Bestellinfo

Ordering information

Enabling grip switches

Contact form

Order code

Enabling switch

Monitor switch

Pushbutton switch

Two contacts

1NC (grip output)

None

A4EG-C000041

Two contacts

None

Emergency stop switch (2NC)

A4EG-BE2R041

Two contacts

None

Momentary operation switch (2NO)

A4EG-BM2B041

Safety guard switching units

Safety outputs 1

Auxiliary outputs 2

Logical AND
connection input

Logical AND connection output

Max. OFF
delay time 3

Rated
voltage

Terminal block type

Order code

Instantaneous

OFF-delayed 4

2 (Semi-
conductors)

2 (Semi-
conductors)

6 (Semi-conductors)

1

1

15 s

24 VDC

Screw terminals

G9SX-GS226-T15-RT

Spring-cage terminals

G9SX-GS226-T15-RC

Specifications

Ratings of guard switching unit

Power input

Item

G9SX-GS226-T15-_

G9SX-EX-_

Rated supply voltage

24 VDC

Inputs

Item

G9SX-GS226-T15-_

Safety input

Operating voltage: 20.4 VDC to 26.4 VDC, internal impedance: approx. 2.8 kΩ

Feedback/reset input

Mode selector input

Outputs

Item

G9SX-G9SX-GS226-T15-_

Instantaneous safety output
OFF-delayed safety output

P channel MOS FET transistor output

Load current: 0.8 A DC max.

Auxiliary output

PNP transistor output

Load current: 100 mA max.

External indicator outputs

P channel MOS FET transistor outputs

Connectable indicators

  • Incandescent lamp: 24 VDC, 3 W to 7 W
  • LED lamp: 10 to 300 mA DC

Application example

Automatic switching mode

Worker is loading and unloading the machine manually. When loading is finished, robot cycle is started manually by the worker. When robots return to their home position, loading cycle is selected automatically.

Loading condition: Safety sensor B is not active, safety sensor A is active because the robots are not allowed to move to the loading area while the worker loads the machine. So the worker is safe because safety sensor A is active.

Robot work condition: Safety sensor B is active, safety sensor A is not active because the worker is not allowed to move to the loading area when the robots work. So the worker is safe because safety sensor B stops the machine if he moves to the loading area.

Manual switching mode

Worker has to do maintenance in this machine. While maintenance, it is necessary to move the machine in a limited way. The worker has to select automatic mode or manual mode manually by using the mode selector switch.

Operation steps:

1) Select maintenance mode by using the mode selector

2) Open the door to do the maintenance while the machine still is able to operate in a limited way (monitoring of limited movement by using the safety limit switch).

3) Close the cover after finishing maintenance

4) Select automatic mode by using the mode selector

E-Stop conditions:

a) open the door while not in maintenance mode

b) the machine actuates the limit switch (breaks the limit).

c) the Enabling grip switch A4EG is actuated to stop the machine in emergency condition.

 


1. P channel MOS FET transistor output

2. PNP transistor output

3. The OFF-delay time can be set in 16 steps as follows:
T15: 0, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 1, 1.5, 2, 3, 4, 5, 7, 10 or 15 s

4. The OFF-delayed output becomes an instantaneous output by setting the OFF-delay time to 0 s.

1. P channel MOS FET transistor output

2. PNP transistor output

3. The OFF-delay time can be set in 16 steps as follows:
T15: 0, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 1, 1.5, 2, 3, 4, 5, 7, 10 or 15 s

4. The OFF-delayed output becomes an instantaneous output by setting the OFF-delay time to 0 s.

Abonnieren Sie unsere Produkt-Updates

Profitieren Sie von Newslettern über Produktinnovationen, Lösungen und Services.

Vielen Dank für Ihr Interesse an unseren eNews. Sie erhalten umgehend eine Email von uns mit einem Link zur Bestätigung Ihrer Newsletter-Bestellung. Dieses Vorgehen basiert aus unseren rechtlichen Hinweisen.

Es liegen zur Zeit technische Probleme vor. Ihre Übertragung war nicht erfolgreich. Entschuldigen Sie dies bitte und versuchen es später noch einmal. Details

Download

Produktdokumentation

Laden Sie sich Datenblätter, Handbücher und Broschüren herunter.

Durchsuchen Sie unser Download-Center

Schulungskurse

Bei unseren Schulungen profitieren Sie von der Kompetenz unserer besten Ingenieure. Für Anfänger bis Fortgeschrittene geeignet

Sehen Sie sich einen Schulungskurs an.