NX1
- CAD Zeichnungen
- NX1 Datenblatt
Thank you for downloading the NX1 Datenblatt
Download againDid you know that 4 out of 5 distributors buy this product in a bundle?
There are many variations of passages of Lorem Ipsum available, but the majority have suffered alteration in some form, by injected humour, or randomised words which don't look even slightly believable.
Read more
Informationssteuerung und Produktivität in einem kompakten Controller
Der modulare Maschinen-Controller der NX1-Baureihe bietet Ablauf-, Bewegungssteuerungs- und Informationsfunktionen. Dabei verbindet er die Bereiche Produktion und IT, reduziert den Entwicklungs- und Wartungsaufwand und macht Middleware überflüssig.
- IoT-fähig: OPC UA-Server standardmäßig integriert, Unterstützung von Variablenstrukturen
- Direkte Datenbankverbindung: SQL-Client für Microsoft SQL Server, Oracle, IBM DB2, MySQL, Firebird und PostgreSQL
- Großer Speicher für die Datenverarbeitung. 33,5 MB für Variablen
- Batterieloser Controller
- Zykluszeit: ab 1 ms
- Bis zu 12 Achsen (8 synchronisierte Bewegungsachsen und 4 PTP-Achsen)
- Ein einziger und synchronisierter Zyklus für lokale und dezentrale E/A, EtherCAT-Geräte und Bewegungssteuerung
- Multitasking-Controller
- Erweiterte Netzwerkkonnektivität, 2 Ethernet-Ports + 1 EtherCAT
- Bis zu 32 lokale NX-Baugruppen, einschließlich Safety und IO-Link-Master
- Unterstützung von bis zu 64 EtherCAT-Knoten (400 NX-Baugruppen)
Ordering information
NX1 series CPU units
| CPU | Program capacity | Variables capacity | Number of axes | Functionalities | Order code | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| Real axes | Motion control servo axes | Single-axis position control axes | Sequence | OPC UA | Motion | DB connection | ||||
| NX102 | 5 MB |
1.5 MB: Retained 32 MB: Not retained |
12 axes | 8 axes | 4 axes | NX102-1220 | ||||
| – |
NX102-1200 | |||||||||
| 8 axes | 4 axes | NX102-1120 | ||||||||
| – | NX102-1100 | |||||||||
| 6 axes | 2 axes | NX102-1020 | ||||||||
| – | NX102-1000 | |||||||||
| 4 axes | 0 axes | – | NX102-9020 | |||||||
| – | – | NX102-9000 | ||||||||
Note:
The end cover unit NX-END02 is included with the CPU unit.
NX I/O units (local and remote I/O)
Up to 32 local NX I/O units can be connected to an NX1 CPU unit.
Communication and control units
| Module Type | Protocol | Connection | Specification | Width | Order code |
|---|---|---|---|---|---|
| Communication coupler | EtherCAT Slave |
2 RJ45 ports (in + out) |
Up to 63 I/O units. Max. 1,024 bytes in + 1,024 bytes out Supports distributed clock I/O power supply up to 10 A |
46 mm | NX-ECC203 |
| Safety controller | FSoE Protocol | 128 Safety connections | For up to 1,024 safety I/O points | 30 mm | NX-SL3500 |
| 32 Safety connections | For up to 256 safety I/O points | NX-SL3300 |
IO-Link master unit
| Module Type | No. of ports | I/O refresh method | Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code |
|---|---|---|---|---|---|
| IO-Link master unit | 4 | Free Run | Screwless push-in (NX-TBA162) | 12 mm | NX-ILM400 |
Note:
For more detailed information about IO-Link master unit, refer to “IO-Link master datasheet (I191E-EN)”.
Digital I/O units
| Module type | Channels, Signal type | Performance
2 ,
I/O Refresh ModeDigital I/O performance
|
Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code | NPN-type
2
Order codes are for PNP-type signals
(positive switching, 0 V common). Most models are also available
as NPN-type (negative switching, 24 V common). Inputs of MIL-connector
versions can be used as NPN or PNP. |
||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AC Digital Input | 4 inputs, 200 to 240 VAC, 50/60 Hz | Free Run | Screwless push-in (NX-TBA082) | 12 mm | NX-IA3117 | – | ||||||||||||||||||||||||||||||||||||
| Safety Digital Input | 4 inputs + 2 test outputs | Free Run | Screwless push-in (NX-TBA082) | 12 mm | NX-SIH400 | – | ||||||||||||||||||||||||||||||||||||
| 8 inputs + 2 test outputs | Screwless push-in (NX-TBA162) | NX-SID800 | – | |||||||||||||||||||||||||||||||||||||||
| DC Digital Input | 4 inputs, 3-wire connection | High-speed Synchronous Time Stamp | Screwless push-in (NX-TBA122) | 12 mm | NX-ID3444 | NX-ID3344 | ||||||||||||||||||||||||||||||||||||
| High-speed Synchronous/Free Run | NX-ID3443 | NX-ID3343 | ||||||||||||||||||||||||||||||||||||||||
| Synchronous/Free Run | NX-ID3417 | NX-ID3317 | ||||||||||||||||||||||||||||||||||||||||
| 8 inputs, 2-wire connection | Screwless push-in (NX-TBA162) | NX-ID4442 | NX-ID4342 | |||||||||||||||||||||||||||||||||||||||
| 16 inputs, 1-wire connection | NX-ID5442 | NX-ID5342 | ||||||||||||||||||||||||||||||||||||||||
| 1 × 20-pin MIL connector | 30 mm | NX-ID5142-5 | same | |||||||||||||||||||||||||||||||||||||||
| M3 screw | NX-ID5142-1 | same | ||||||||||||||||||||||||||||||||||||||||
| 32 inputs, 1-wire connection | 1 × 40-pin MIL connector | NX-ID6142-5 | same | |||||||||||||||||||||||||||||||||||||||
| 1 × 40-pin Fujitsu connector | NX-ID6142-6 | same | ||||||||||||||||||||||||||||||||||||||||
| DC Digital I/O | 16 inputs + 16 outputs 0.5 A, 1-wire connection + common | Synchronous/Free Run | 2 × 20-pin MIL connector | 30 mm | NX-MD6256-5 | NX-MD6121-5 | ||||||||||||||||||||||||||||||||||||
| 2 × 24-pin Fujitsu connector | – | NX-MD6121-6 | ||||||||||||||||||||||||||||||||||||||||
| DC Digital Output | 2 outputs 0.5 A, 3-wire connection | High-speed Synchronous Time Stamp | Screwless push-in (NX-TBA082) | 12 mm | NX-OD2258 | NX-OD2154 | ||||||||||||||||||||||||||||||||||||
| 4 outputs 0.5 A, 3-wire connection | High-speed Synchronous/Free Run | Screwless push-in (NX-TBA122) | NX-OD3257 | NX-OD3153 | ||||||||||||||||||||||||||||||||||||||
| Synchronous/Free Run | NX-OD3256 | NX-OD3121 | ||||||||||||||||||||||||||||||||||||||||
| 4 outputs 2 A/point, 8 A total, 3-wire connection | Screwless push-in (NX-TBA162) | NX-OD3268 | – | |||||||||||||||||||||||||||||||||||||||
| 8 outputs 0.5 A, 2-wire connection | NX-OD4256 | NX-OD4121 | ||||||||||||||||||||||||||||||||||||||||
| 16 outputs 0.5 A, 1-wire connection | NX-OD5256 | NX-OD5121 | ||||||||||||||||||||||||||||||||||||||||
| 1 × 20-pin MIL connector | 30 mm | NX-OD5256-5 | NX-OD5121-5 | |||||||||||||||||||||||||||||||||||||||
| M3 screw | NX-OD5256-1 | NX-OD5121-1 | ||||||||||||||||||||||||||||||||||||||||
| 32 outputs 0.5 A, 1-wire connection | 1 × 40-pin MIL connector | NX-OD6256-5 | NX-OD6121-5 | |||||||||||||||||||||||||||||||||||||||
| 1 × 40-pin Fujitsu connector | – | NX-OD6121-6 | ||||||||||||||||||||||||||||||||||||||||
| Safety Digital Output | 2 outputs, 2.0 A | Free Run | Screwless push-in (NX-TBA082) | 12 mm | NX-SOH200 | – | ||||||||||||||||||||||||||||||||||||
| 4 outputs, 0.5 A | NX-SOD400 | – | ||||||||||||||||||||||||||||||||||||||||
| Relay Digital Output | 2 outputs, N.O., 2.0 A | Free Run | Screwless push-in (NX-TBA082) | 12 mm | NX-OC2633 | – | ||||||||||||||||||||||||||||||||||||
| 8 outputs, N.O., 2.0 A | Screwless push-in (NX-TBA082 × 2) | 24 mm | NX-OC4633 | – | ||||||||||||||||||||||||||||||||||||||
| 2 outputs, N.O.+ N.C., 2.0 A | Screwless push-in (NX-TBA082) | 12 mm | NX-OC2733 | – | ||||||||||||||||||||||||||||||||||||||
Analog I/O units
| Module type | Signal type | Performance, I/O Refresh Mode | Channels | Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code |
|---|---|---|---|---|---|---|
| Temperature Sensor -Input | Thermocouple type B,E,J,K,L,N,R,S,T,U,WRe5-26,PLII |
0.1°C resolution, 200 ms/unit Free Run |
2 | Screwless push-in terminal block(s) with cold junction sensor, calibrated -individually at the factory | 12 mm | NX-TS2101 |
| 4 | 24 mm | NX-TS3101 | ||||
| 0.01°C resolution, 10 ms/unit Free Run |
2 | 12 mm | NX-TS2102 | |||
| 4 | 24 mm | NX-TS3102 | ||||
| 0.001°C resolution, 60 ms/unit Free Run |
2 | 12 mm | NX-TS2104 | |||
| 4 | 24 mm | NX-TS3104 | ||||
| RTD type Pt100 (3-wire), Pt1000, Ni508.4 |
0.1°C resolution, 200 ms/unit Free Run |
2 | Screwless push-in (NX-TBA162) | 12 mm | NX-TS2201 | |
| 4 | Screwless push-in (NX-TBA162 + NX-TBB162) |
24 mm | NX-TS3201 | |||
| 0.01°C resolution, 10 ms/unit Free Run |
2 | Screwless push-in (NX-TBA162) | 12 mm | NX-TS2202 | ||
| 4 | Screwless push-in (NX-TBA162 + NX-TBB162) |
24 mm | NX-TS3202 | |||
| 0.001°C resolution, 60 ms/unit Free Run |
2 | Screwless push-in (NX-TBA162) | 12 mm | NX-TS2204 | ||
| 4 | Screwless push-in (NX-TBA162 + NX-TBB162) |
24 mm | NX-TS3204 | |||
| Analog Input | 4 to 20 mA single ended |
1/8000 resolution, 250 µs/channel Free Run |
2 | Screwless push-in (NX-TBA082) | 12 mm | NX-AD2203 |
| 4 | Screwless push-in (NX-TBA122) | NX-AD3203 | ||||
| 8 | Screwless push-in (NX-TBA162) | NX-AD4203 | ||||
| 4 to 20 mA differential |
1/8000 resolution, 250 µs/channel Free Run |
2 | Screwless push-in (NX-TBA082) | NX-AD2204 | ||
| 4 | Screwless push-in (NX-TBA122) | NX-AD3204 | ||||
| 8 | Screwless push-in (NX-TBA162) | NX-AD4204 | ||||
| 1/30000 resolution,10 µs/channel Synchronous/Free Run |
2 | Screwless push-in (NX-TBA082) | NX-AD2208 | |||
| 4 | Screwless push-in (NX-TBA122) | NX-AD3208 | ||||
| 8 | Screwless push-in (NX-TBA162) | NX-AD4208 | ||||
| –10 to 10 V single ended |
1/8000 resolution, 250 µs/channel Free Run |
2 | Screwless push-in (NX-TBA082) | NX-AD2603 | ||
| 4 | Screwless push-in (NX-TBA122) | NX-AD3603 | ||||
| 8 | Screwless push-in (NX-TBA162) | NX-AD4603 | ||||
| –10 to 10 V differential |
1/8000 resolution, 250 µs/channel Free Run |
2 | Screwless push-in (NX-TBA082) | NX-AD2604 | ||
| 4 | Screwless push-in (NX-TBA122) | NX-AD3604 | ||||
| 8 | Screwless push-in (NX-TBA162) | NX-AD4604 | ||||
| 1/30000 resolution,10 µs/channel Synchronous/Free Run |
2 | Screwless push-in (NX-TBA082) | NX-AD2608 | |||
| 4 | Screwless push-in (NX-TBA122) | NX-AD3608 | ||||
| 8 | Screwless push-in (NX-TBA162) | NX-AD4608 | ||||
| High-Speed Analog Input | –10 to 10 V, –5 to 5 V, 0 to 10 V, 0 to 5 V, 1 to 5 V, 0 to 20 mA, 4 to 20 mA differential |
–10 to 10 V or –5 to 5 V: 1/64000 Other input range: 1/32000 5 µs/channel Synchronous |
4 (NPN) | Screwless push-in (NX-TBA162 + NX-TBB162) |
24 mm | NX-HAD401 |
| 4 (PNP) | NX-HAD402 | |||||
| Analog Output | 4 to 20 mA | 1/8000 resolution, 250 µs/channel Free Run |
2 | Screwless push-in (NX-TBA082) | 12 mm | NX-DA2203 |
| 4 | Screwless push-in (NX-TBA122) | NX-DA3203 | ||||
| 1/30000 resolution,10 µs/channel Synchronous/Free Run |
2 | Screwless push-in (NX-TBA082) | NX-DA2205 | |||
| 4 | Screwless push-in (NX-TBA122) | NX-DA3205 | ||||
| –10 to 10 V | 1/8000 resolution, 250 µs/channel Free Run |
2 | Screwless push-in (NX-TBA082) | NX-DA2603 | ||
| 4 | Screwless push-in (NX-TBA122) | NX-DA3603 | ||||
| 1/30000 resolution,10 µs/channel Synchronous/Free Run |
2 | Screwless push-in (NX-TBA082) | NX-DA2605 | |||
| 4 | Screwless push-in (NX-TBA122) | NX-DA3605 |
Temperature control units
| Module type | Conversion time, I/O Refresh Mode |
Channels | Input type | Output type | Output capacity | CT Input capacity | Control type | Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code |
|---|---|---|---|---|---|---|---|---|---|---|
| Temperature control |
50 ms Free run |
2 | Multi-input (Thermocouple and Resistance thermometer) |
Voltage output (for driving SSR) | 2 points | 2 points | Standard | Screwless push-in (NX-TBA162) | 12 mm | NX-TC2405 |
| – | NX-TC2406 | |||||||||
| 4 points | Heating and Cooling | NX-TC2407 | ||||||||
| Linear current output | 2 points | Standard | NX-TC2408 | |||||||
| 4 | Voltage output (for driving SSR) | 4 points | 4 points | Standard | Screwless push-in (NX-TBA162 + NX-TBB162) |
24 mm | NX-TC3405 | |||
| – | NX-TC3406 | |||||||||
| 8 points | Heating and Cooling | NX-TC3407 | ||||||||
| Linear current output | 4 points | Standard | NX-TC3408 |
Heater burnout detection units
| Module type | Channels, signal type | Control output | I/O refresh method | Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code |
|---|---|---|---|---|---|---|
| Heater burnout detection | 4 CT inputs 4 control outputs |
NPN, 12 to 24 VDC 0.1 A/point, 0.4 A/unit |
Free Run | Screwless push-in (NX-TBA162) | 12 mm | NX-HB3101 |
| PNP 24 VDC 0.1 A/point, 0.4 A/unit |
NX-HB3201 |
Load cell input unit
| Module type | Specifications | Excitation voltage/input range | I/O refresh method | Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code |
|---|---|---|---|---|---|---|
| Load cell input | 1 load cell input, 125 µs conversion cycle | 5 VDC ±10%/–5 to 5 mV/V | Synchronous/ Free Run |
Screwless push-in (NX-TBC162) | 12 mm | NX-RS1201 |
Position control units
| Module type | Channels, Signal type | Performance
2 ,
I/O Refresh ModeDigital I/O performance
Order codes are for PNP-type signals (positive switching, 0 V common). Most models are also available as NPN-type (negative switching, 24 V common). Inputs of MIL-connector versions can be used as NPN or PNP. |
Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code | NPN-type
2
Order codes are for PNP-type signals
(positive switching, 0 V common). Most models are also available
as NPN-type (negative switching, 24 V common). Inputs of MIL-connector
versions can be used as NPN or PNP. |
||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Encoder Input | 1 SSI encoder, 2 MHz | Synchronous/Free Run | Screwless push-in (NX-TBA122) | 12 mm | NX-ECS112 | – | ||||||||||||||||||||||||||||||||||||
| 2 SSI encoders, 2 MHz | NX-ECS212 | – | ||||||||||||||||||||||||||||||||||||||||
| 1 incremental encoder line driver 4 MHz + 3 Digital Inputs (1 µs) | Screwless push-in (NX-TBA122 + NX-TBB122) |
24 mm | NX-EC0142 | NX-EC0132 | ||||||||||||||||||||||||||||||||||||||
| 1 incremental encoder open collector 500 kHz + 3 Digital Inputs (1 µs) | Screwless push-in (NX-TBA162) | 12 mm | NX-EC0122 | NX-EC0112 | ||||||||||||||||||||||||||||||||||||||
| 2 incremental encoders open collector 500 kHz | Screwless push-in (NX-TBA122) | NX-EC0222 | NX-EC0212 | |||||||||||||||||||||||||||||||||||||||
| Pulse Output | 1 Pulse Up/Down or Pulse/Direction open collector 500 kHz + 2 Digital -Inputs + 1 Digital Output (1 µs) | Synchronous | Screwless push-in (NX-TBA162) | 12 mm | NX-PG0122 | NX-PG0112 | ||||||||||||||||||||||||||||||||||||
| 2 pulse line driver 4 MHz + 5 digital inputs per channel + 3 digital outputs per channel | 1 × 34-pin MIL connector | 30 mm | NX-PG0242-5 | NX-PG0232-5 | ||||||||||||||||||||||||||||||||||||||
| 4 pulse line driver 4 MHz + 5 digital inputs per channel + 3 digital outputs per channel | 2 × 34-pin MIL connector | NX-PG0342-5 | NX-PG0332-5 | |||||||||||||||||||||||||||||||||||||||
Serial communication interface units
| Module type | Channels, Signal type | Performance
2 ,
I/O Refresh ModeDigital I/O performance
Order codes are for PNP-type signals (positive switching, 0 V common). Most models are also available as NPN-type (negative switching, 24 V common). Inputs of MIL-connector versions can be used as NPN or PNP. |
Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code | NPN-type
2
Order codes are for PNP-type signals
(positive switching, 0 V common). Most models are also available
as NPN-type (negative switching, 24 V common). Inputs of MIL-connector
versions can be used as NPN or PNP. |
||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Serial Communication | 1 × RS-422A/485 | Free Run | Screwless push-in (NX-TBC162) | 12 mm | NX-CIF105 | – | ||||||||||||||||||||||||||||||||||||
| 1 × RS-232C | NX-CIF101 | – | ||||||||||||||||||||||||||||||||||||||||
| 2 × RS-232C | 9-pin D-sub | 30 mm | NX-CIF210 | – | ||||||||||||||||||||||||||||||||||||||
Other units
| Module type | Description | Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code |
|---|---|---|---|---|
| Power Unit | NX bus power supply unit, 24 V DC input, non-isolated | Screwless push-in (NX-TBC082) | 12 mm | NX-PD1000 |
| I/O power feed unit, for separation of power groups, up to 10 A | Screwless push-in (NX-TBA082) | NX-PF0730 | ||
| I/O power connection unit, 16 × IOV | Screwless push-in (NX-TBA162) | NX-PC0020 | ||
| I/O power connection unit, 16 × IOG | NX-PC0010 | |||
| I/O power connection, 8 × IOV + 8 x IOG | NX-PC0030 | |||
| System Units and -Accessories | Grounding terminal, 16 points | Screwless push-in (NX-TBC162) | NX-TBX01 | |
| End cover (included with Communication Coupler) | – | NX-END01 | ||
| Replacement front connector with 8 wiring terminals (marked A+B) | Screwless push-in | NX-TBA082 | ||
| Replacement front connector with 12 wiring terminals (marked A+B) | NX-TBA122 | |||
| Replacement front connector with 16 wiring terminals (marked A+B) | NX-TBA162 | |||
| Replacement front connector with 12 wiring terminals (marked C+D) | NX-TBB122 | |||
| Replacement front connector with 16 wiring terminals (marked C+D) | NX-TBB162 | |||
| Replacement front connector with 8 wiring terminals (marked A+B+FG) | NX-TBC082 | |||
| Replacement front connector with 16 wiring terminals (marked A+B+FG) | NX-TBC162 | |||
| DIN rail insulation spacers, set of 3 pcs | – | NX-AUX01 | ||
| 30 Unit pins + 30 Terminal keying pins, to prevent mismatch of unit and terminal block (one set is enough for 10 units) | – | NX-AUX02 | ||
Recommended EtherCAT and EtherNet/IP communication cables
| Item | Manufacturer | Color | Cable length (m) | Order code | ||
|---|---|---|---|---|---|---|
| EtherCAT cable |
Cat 5e, AWG22, 2-pair cable M12/Smartclick connectors Improved shield for EtherCATcommunications |
Standard type Cable with connectors on both ends (M12 straight/M12 straight) |
OMRON | Black | 0.5 | XS5W-T421-BM2-SS |
| 1 | XS5W-T421-CM2-SS | |||||
| 2 | XS5W-T421-DM2-SS | |||||
| 3 | XS5W-T421-EM2-SS | |||||
| 5 | XS5W-T421-GM2-SS | |||||
| 10 | XS5W-T421-JM2-SS | |||||
|
Rugged type Cable with connectors on both ends (M12 straight/RJ45) 
|
Black | 0.5 | XS5W-T421-BMCSS | |||
| 1 | XS5W-T421-CMC-SS | |||||
| 2 | XS5W-T421-DMC-SS | |||||
| 3 | XS5W-T421-EMC-SS | |||||
| 5 | XS5W-T421-GMC-SS | |||||
| 10 | XS5W-T421-JMC-SS | |||||
| Ethernet/EtherCAT patch cable |
Cat 6a, AWG27, 4-pair cable Cable sheath material: LSZH
2 ,The lineup features
low smoke zero halogen cables for in-cabinet use and PUR cables
for out-of-cabinet use.
2
This cable is available
in yellow, green and blue colors. |
Standard type Cable with connectors on both ends (RJ45/RJ45)
|
Yellow | 0.2 | XS6W-6LSZH8SS20CM-Y | |
| 0.3 | XS6W-6LSZH8SS30CM-Y | |||||
| 0.5 | XS6W-6LSZH8SS50CM-Y | |||||
| 1 | XS6W-6LSZH8SS100CM-Y | |||||
| 1.5 | XS6W-6LSZH8SS150CM-Y | |||||
| 2 | XS6W-6LSZH8SS200CM-Y | |||||
| 3 | XS6W-6LSZH8SS300CM-Y | |||||
| 5 | XS6W-6LSZH8SS500CM-Y | |||||
| 7.5 | XS6W-6LSZH8SS750CM-Y | |||||
| 10 | XS6W-6LSZH8SS1000CM-Y | |||||
| 15 | XS6W-6LSZH8SS1500CM-Y | |||||
| 20 | XS6W-6LSZH8SS2000CM-Y | |||||
| Green | 0.2 | XS6W-6LSZH8SS20CM-G | ||||
| 0.3 | XS6W-6LSZH8SS30CM-G | |||||
| 0.5 | XS6W-6LSZH8SS50CM-G | |||||
| 1 | XS6W-6LSZH8SS100CM-G | |||||
| 1.5 | XS6W-6LSZH8SS150CM-G | |||||
| 2 | XS6W-6LSZH8SS200CM-G | |||||
| 3 | XS6W-6LSZH8SS300CM-G | |||||
| 5 | XS6W-6LSZH8SS500CM-G | |||||
| 7.5 | XS6W-6LSZH8SS750CM-G | |||||
| 10 | XS6W-6LSZH8SS1000CM-G | |||||
| 15 | XS6W-6LSZH8SS1500CM-G | |||||
| 20 | XS6W-6LSZH8SS2000CM-G | |||||
|
Cat 5e, AWG26, 4-pair cable Cable sheath material: PUR
2
The lineup features
low smoke zero halogen cables for in-cabinet use and PUR cables
for out-of-cabinet use. |
Standard type Cable with connectors on both ends (RJ45/RJ45)
|
Green | 0.5 | XS6W-5PUR8SS50CM-G | ||
| 1 | XS6W-5PUR8SS100CM-G | |||||
| 1.5 | XS6W-5PUR8SS150CM-G | |||||
| 2 | XS6W-5PUR8SS200CM-G | |||||
| 3 | XS6W-5PUR8SS300CM-G | |||||
| 5 | XS6W-5PUR8SS500CM-G | |||||
| 7.5 | XS6W-5PUR8SS750CM-G | |||||
| 10 | XS6W-5PUR8SS1000CM-G | |||||
| 15 | XS6W-5PUR8SS1500CM-G | |||||
| 20 | XS6W-5PUR8SS2000CM-G | |||||
| Cat 5e, AWG22, 2-pair cable |
Rugged type Cable with connectors on both ends (RJ45/RJ45) 
|
OMRON | Grey | 0.3 | XS5W-T421-AMD-K | |
| 0.5 | XS5W-T421-BMD-K | |||||
| 1 | XS5W-T421-CMD-K | |||||
| 2 | XS5W-T421-DMD-K | |||||
| 3 | XS5W-T421-EMD-K | |||||
| 5 | XS5W-T421-GMD-K | |||||
| 10 | XS5W-T421-JMD-K | |||||
| 15 | XS5W-T421-KMD-K | |||||
|
Rugged type Cable with connectors on both ends (M12 straight/RJ45) 
|
Grey | 0.3 | XS5W-T421-AMC-K | |||
| 0.5 | XS5W-T421-BMC-K | |||||
| 1 | XS5W-T421-CMC-K | |||||
| 2 | XS5W-T421-DMC-K | |||||
| 3 | XS5W-T421-EMC-K | |||||
| 5 | XS5W-T421-GMC-K | |||||
| 10 | XS5W-T421-JMC-K | |||||
| 15 | XS5W-T421-KMC-K | |||||
| Ethernet/EtherCAT patch cable |
Cat 5e, AWG22, 2-pair cable |
Rugged type Cable with connectors on both ends (M12 L right angle/RJ45) 
|
OMRON | Grey | 0.3 | XS5W-T422-AMC-K |
| 0.5 | XS5W-T422-BMC-K | |||||
| 1 | XS5W-T422-CMC-K | |||||
| 2 | XS5W-T422-DMC-K | |||||
| 3 | XS5W-T422-EMC-K | |||||
| 5 | XS5W-T422-GMC-K | |||||
| 10 | XS5W-T422-JMC-K | |||||
| 15 | XS5W-T422-KMC-K | |||||
| Ethernet -installation -cable | Cat 5, SF/UTP, 4 × 2 × AWG 24/1 (solid core), Polyurethane (PUR) | Weidmüller | Green | 100 | WM IE-5IC4x2xAWG24/1-PUR | |
| Cat 5, SF/UTP, 4 × 2 × AWG 26/7 (stranded core), Polyurethane (PUR) | Green | 100 | WM IE-5IC4x2xAWG26/7-PUR | |||
| Connectors |
RJ45 metallic connector For AWG22 to AWG26 |
 |
– | – | WM IE-T0-RJ45-FH-BK | |
|
RJ45 plastic connector For AWG22 to AWG24 |
 |
OMRON | – | – | XS6G-T421-1 | |
| RJ45 socket | DIN-rail mount socket to terminate installation cable in the -cabinet | Weidmüller | – | – | WM IE-T0-RJ45-FJ-B | |
Note:
Please be careful while cable processing, for EtherCAT, connectors on both ends should be shield connected and for EtherNet/IP, connectors on only one end should be shield connected.
Accessories
| Appearance | Specifications | Order code | ||
|---|---|---|---|---|
 |
EtherCAT junction slaves |
3 ports Power supply voltage: 20.4 to 28.8 VDC (24 VDC –15 to 20%) Current consumption: 0.08 A |
GX-JC03 | |
 |
6 ports Power supply voltage: 20.4 to 28.8 VDC (24 VDC –15 to 20%) Current consumption: 0.17 A |
GX-JC06 | ||
 |
Industrial switching hubs (for EtherNet/IP and Ethernet) |
Quality of Service (QoS): EtherNet/IP control data priority. Failure detection: Broadcast storm and LSI error detection 10/100 BASE-TX, Auto-Negotiation Current consumption: 0.22 A |
3 ports Power supply connector included |
W4S1-03B |
|
5 ports Power supply connector included |
W4S1-05B | |||
|
5 ports Power supply connector and connector for informing error -included |
W4S1-05C | |||
 |
SD memory card | 2 GB | HMC-SD291 | |
| 4 GB | HMC-SD491 | |||
 |
DIN track | Length: 0.5 m; height: 7.3 mm | PFP-50N | |
| Length: 1 m; height: 7.3 mm | PFP-100N | |||
| Length: 1 m; height: 16 mm | PFP-100N2 | |||
|
End plate to secure the units on the DIN rail | PFP-M (2 pcs) | ||
 |
Battery for NX/NJ CPU unit | CJ1W-BAT01 | ||
 |
End cover |
End cover for NX1 and NX1P CPU units (Provided with the CPU unit) |
NX-END02 | |
|
End cover for EtherCAT communication coupler unit (Provided with the EtherCAT communication coupler unit) |
NX-END01 | |||
Computer software
| Specifications | Order code |
|---|---|
| Sysmac Studio Lite Edition
2 version 1.23 or higherSame functionality
and supported devices than Sysmac Studio Standard Edition except
for controller. The Lite Edition only supports the NX1, NX1P and
NJ1 machine controllers. |
SYSMAC-LE____
2
Refer
to the Sysmac Studio datasheet (Cat. No. SysCat_I181E) for detailed
information or contact your OMRON representative. |
Broschüren
Alle anzeigen broschüren
Datenblätter
Alle anzeigen datenblätter
Handbücher
Alle anzeigen handbücher
Abonnieren Sie unsere Produkt-Updates
Profitieren Sie von Newslettern über Produktinnovationen, Lösungen und Services.
Vielen Dank für Ihr Interesse an unseren eNews. Sie erhalten umgehend eine Email von uns mit einem Link zur Bestätigung Ihrer Newsletter-Bestellung. Dieses Vorgehen basiert aus unseren rechtlichen Hinweisen.
Es liegen zur Zeit technische Probleme vor. Ihre Übertragung war nicht erfolgreich. Entschuldigen Sie dies bitte und versuchen es später noch einmal. Details
DownloadProduktdokumentation
Laden Sie sich Datenblätter, Handbücher und Broschüren herunter.
Durchsuchen Sie unser Download-CenterSchulungskurse
Bei unseren Schulungen profitieren Sie von der Kompetenz unserer besten Ingenieure. Für Anfänger bis Fortgeschrittene geeignet
Sehen Sie sich einen Schulungskurs an.