NX1P

CAD Zeichnungen
NX1P_ NX1-series Machine Controller Datenblatt

Kompakte Größe, leistungsstarke Funktionen

Der NX1P komplettiert die NX/NJ-Maschinencontrollerfamilie und bietet denselben Funktionsumfang in einem kompakten Design. Der NX1P ermöglicht die synchronisierte Steuerung aller Maschinengeräte wie Motion, E/A, Sicherheit und Bildverarbeitung in einer integrierten Entwicklungsumgebung.

Ultrakurze Zykluszeit: 2 ms
Funktionen: Logiksequenzierung und Bewegungssteuerung
Bis zu 8 Achsen (4 synchronisierte Achsen)
Bis zu 4 PTP-Achsen
Integrierte E/A: 40 oder 24 E/A-Punkte
Bis zu 8 lokale NX E/A-Einheiten
Integrierte Ports für EtherCAT und EtherNet/IP
Bis zu 16 EtherCAT-Slaves
Bis zu 2 Optionsmodule können angeschlossen werden, um das System um serielle oder analoge E/A-Funktionen zu erweitern.
EtherCAT-Ringtopologie wird unterstützt, um die Kommunikation und Steuerung bei einem Kabelbruch oder Geräteausfall aufrecht zu erhalten.

Spezifikationen & Bestellinfo

Ordering information

NX1P series CPU units

Appearance	Type	Program capacity	Memory capacity for variables	Number of axes			Built-in I/O points			Order code
Appearance	Type	Program capacity	Memory capacity for variables	Real axes	Motion control servo axes	Single-axis position control servo axes	I/O points	Input points	Output points	Order code
	NX1P	1.5 MB	32 KB (retained during power interruptions) or 2 MB (not retained during power interruptions)	8 axes	4 axes	4 axes	40 points	24 points	16 points NPN transistor	NX1P2-1140DT
				8 axes	4 axes				16 points PNP transistor 2 With the load short-circuit protection.	NX1P2-1140DT1
				6 axes	2 axes				16 points NPN transistor	NX1P2-1040DT
				6 axes	2 axes				16 points PNP transistor 2 With the load short-circuit protection.	NX1P2-1040DT1
		1 MB		2 axes	0 axes	2 axes			16 points NPN transistor	NX1P2-9B40DT
		1 MB		2 axes		2 axes			16 points PNP transistor 2 With the load short-circuit protection.	NX1P2-9B40DT1
		1. 5MB		4 axes		4 axes	24 points	14 points	10 points NPN transistor	NX1P2-9024DT
		1. 5MB		4 axes		4 axes			10 points PNP transistor 2 With the load short-circuit protection.	NX1P2-9024DT1
		1 MB		2 axes		2 axes			10 points NPN transistor	NX1P2-9B24DT
		1 MB		2 axes		2 axes			10 points PNP transistor 2 With the load short-circuit protection.	NX1P2-9B24DT1

Note:

The end cover unit NX-END02 is included with the CPU unit.

Option boards

Type	Specifications	Supported protocol	Order code
Serial communications	1 × RS-232C port Transmission distance: 15 m Connection type: Screwless push-in terminal block (9 terminals)	Host link, Modbus-RTU master and no-protocol	NX1W-CIF01
	1 × RS-422A/485 port Transmission distance: 50 m Connection type: Screwless push-in terminal block (5 terminals)		NX1W-CIF11
	1 × RS-422A/485 port (isolated) Transmission distance: 500 m Connection type: Screwless push-in terminal block (5 terminals)		NX1W-CIF12
Analog I/O	2 × Analog input Voltage input: 0 to 10 V (Resolution: 1/4,000) Current input: 0 to 20 mA (1/2,000) Connection type: Screwless push-in terminal block (5 terminals)		NX1W-ADB21
	2 × Analog output Voltage output: 0 to 10 V (Resolution: 1/4,000) Connection type: Screwless push-in terminal block (3 terminals)		NX1W-DAB21V
	2 × Analog input / 2 × Analog output Voltage input: 0 to 10 V (Resolution: 1/4,000) Current input: 0 to 20 mA (1/2,000) Voltage output: 0 to 10 V (Resolution: 1/4,000) Connection type: Screwless push-in terminal block (8 terminals)		NX1W-MAB221

NX I/O units (local and remote I/O)

Up to 8 local NX I/O units can be connected to an NX1P CPU unit. The NX-Safety units must be used in combination with the EtherCAT communication coupler unit.

Communication and control units

Module Type	Protocol	Connection	Specification	Width	Order code
Communication coupler	EtherCAT Slave	2 RJ45 ports (in + out)	Up to 63 I/O units. Max. 1,024 bytes in + 1,024 bytes out Supports distributed clock I/O power supply up to 10 A	46 mm	NX-ECC203
Safety controller 2 The NX-Safety units must be used in combination with the EtherCAT communication coupler unit.	FSoE Protocol	128 Safety connections	For up to 1,024 safety I/O points	30 mm	NX-SL3500
32 Safety connections	For up to 256 safety I/O points	30 mm	NX-SL3300

Module Type

Protocol

Connection

Specification

Width

Order code

Communication coupler

EtherCAT Slave

2 RJ45 ports
(in + out)

Up to 63 I/O units.

Max. 1,024 bytes in + 1,024 bytes out

Supports distributed clock

I/O power supply up to 10 A

46 mm

NX-ECC203

Safety controller

FSoE Protocol

128 Safety connections

For up to 1,024 safety I/O points

30 mm

NX-SL3500

32 Safety connections

For up to 256 safety I/O points

30 mm

NX-SL3300

IO-Link master unit

Module Type	No. of ports	I/O refresh method	Connection type 2 Units with Screwless push-in connections are supplied with the appropriate terminal connector.	Width	Order code
IO-Link master	4	Free Run	Screwless push-in (NX-TBA162)	12 mm	NX-ILM400

Note:

For more detailed information about IO-Link master unit, refer to “IO-Link master datasheet (I191E-EN)”.

RFID units

Module Type	No. of channels	Amplifier/Antenna	I/O refresh mode	Connection type	Width	Order code
RFID unit	1	V680 series	Free Run	FG terminal block	30 mm	NX-V680C1
RFID unit	2	V680 series	Free Run	FG terminal block	30 mm	NX-V680C2

Digital I/O units

Module type

Channels, Signal type

Performance

Digital I/O performance

Digital I/O performance		Standard		High Speed
Digital I/O performance		ON delay	OFF delay	ON delay	OFF delay
Input	PNP	0.02 ms	0.4 ms	100 ns	100 ns
	NPN	0.02 ms	0.4 ms	100 ns	100 ns
	AC	10 ms	40 ms	N.A.	N.A.
Output	PNP	0.5 ms	1.0 ms	300 ns	300 ns
	NPN	0.1 ms	0.8 ms	300 ns	300 ns
	Relay	15 ms	15 ms	N.A.	N.A.

, I/O Refresh Mode

Connection type

Width

Order code

NPN-type

AC Digital Input

4 inputs, 200 to 240 VAC, 50/60 Hz

Free Run

Screwless push-in (NX-TBA082)

12 mm

NX-IA3117

–

Safety Digital Input

4 inputs + 2 test outputs

Free Run

Screwless push-in (NX-TBA082)

12 mm

NX-SIH400

–

8 inputs + 2 test outputs

Free Run

Screwless push-in (NX-TBA162)

12 mm

NX-SID800

–

DC Digital Input

4 inputs, 3-wire connection

High-speed Synchronous Time Stamp

Screwless push-in (NX-TBA122)

12 mm

NX-ID3444

NX-ID3344

High-speed Synchronous/Free Run

Screwless push-in (NX-TBA122)

12 mm

NX-ID3443

NX-ID3343

Synchronous/Free Run

Screwless push-in (NX-TBA122)

12 mm

NX-ID3417

NX-ID3317

8 inputs, 2-wire connection

Synchronous/Free Run

Screwless push-in (NX-TBA162)

12 mm

NX-ID4442

NX-ID4342

16 inputs, 1-wire connection

Synchronous/Free Run

Screwless push-in (NX-TBA162)

12 mm

NX-ID5442

NX-ID5342

1 × 20-pin MIL connector

30 mm

NX-ID5142-5

same

M3 screw

30 mm

NX-ID5142-1

same

32 inputs, 1-wire connection

Synchronous/Free Run

1 × 40-pin MIL connector

30 mm

NX-ID6142-5

same

1 × 40-pin Fujitsu connector

30 mm

NX-ID6142-6

same

DC Digital I/O

16 inputs + 16 outputs 0.5 A,
1-wire connection + common

Synchronous/Free Run

2 × 20-pin MIL connector

30 mm

NX-MD6256-5

NX-MD6121-5

2 × 24-pin Fujitsu connector

30 mm

–

NX-MD6121-6

DC Digital Output

2 outputs 0.5 A,
3-wire connection

High-speed Synchronous Time Stamp

Screwless push-in (NX-TBA082)

12 mm

NX-OD2258

NX-OD2154

4 outputs 0.5 A,
3-wire connection

High-speed Synchronous/Free Run

Screwless push-in (NX-TBA122)

12 mm

NX-OD3257

NX-OD3153

Synchronous/Free Run

Screwless push-in (NX-TBA122)

12 mm

NX-OD3256

NX-OD3121

4 outputs 2 A/point, 8 A total,
3-wire connection

Synchronous/Free Run

Screwless push-in (NX-TBA162)

12 mm

NX-OD3268

–

8 outputs 0.5 A,
2-wire connection

Synchronous/Free Run

Screwless push-in (NX-TBA162)

12 mm

NX-OD4256

NX-OD4121

16 outputs 0.5 A,
1-wire connection

Synchronous/Free Run

Screwless push-in (NX-TBA162)

12 mm

NX-OD5256

NX-OD5121

1 × 20-pin MIL connector

30 mm

NX-OD5256-5

NX-OD5121-5

M3 screw

30 mm

NX-OD5256-1

NX-OD5121-1

32 outputs 0.5 A,
1-wire connection

Synchronous/Free Run

1 × 40-pin MIL connector

30 mm

NX-OD6256-5

NX-OD6121-5

1 × 40-pin Fujitsu connector

30 mm

–

NX-OD6121-6

Safety Digital Output

2 outputs, 2.0 A

Free Run

Screwless push-in (NX-TBA082)

12 mm

NX-SOH200

–

4 outputs, 0.5 A

Free Run

Screwless push-in (NX-TBA082)

12 mm

NX-SOD400

–

Relay Digital Output

2 outputs, N.O., 2.0 A

Free Run

Screwless push-in (NX-TBA082)

12 mm

NX-OC2633

–

8 outputs, N.O., 2.0 A

Free Run

Screwless push-in (NX-TBA082 × 2)

24 mm

NX-OC4633

–

2 outputs, N.O.+ N.C., 2.0 A

Free Run

Screwless push-in (NX-TBA082)

12 mm

NX-OC2733

–

Position control units

Module type	Channels, Signal type	Performance, I/O Refresh Mode	Connection type 2 Units with screwless push-in connections are supplied with the appropriate terminal connector. Units with MIL/Fujitsu connectors are supplied without matching plugs.	Width	Order code	NPN-type 2 Order codes are for PNP-type signals (positive switching, 0 V common). Most models are also available as NPN-type (negative switching, 24 V common). Inputs of MIL-connector versions can be used as NPN or PNP.
Encoder Input	1 SSI encoder, 2 MHz	Synchronous/Free Run	Screwless push-in (NX-TBA122)	12 mm	NX-ECS112	–
	2 SSI encoders, 2 MHz	Synchronous/Free Run	Screwless push-in (NX-TBA122)	12 mm	NX-ECS212	–
	1 incremental encoder line driver 4 MHz + 3 Digital Inputs (1 µs)	Synchronous/Free Run	Screwless push-in (NX-TBA122 + NX-TBB122)	24 mm	NX-EC0142	NX-EC0132
	1 incremental encoder open collector 500 kHz + 3 Digital Inputs (1 µs)	Synchronous/Free Run	Screwless push-in (NX-TBA162)	12 mm	NX-EC0122	NX-EC0112
	2 incremental encoders open collector 500 kHz	Synchronous/Free Run	Screwless push-in (NX-TBA122)	12 mm	NX-EC0222	NX-EC0212
Pulse Output	1 Pulse Up/Down or Pulse/Direction open collector 500 kHz + 2 Digital -Inputs + 1 Digital Output (1 µs)	Synchronous	Screwless push-in (NX-TBA162)	12 mm	NX-PG0122	NX-PG0112
	2 pulse line driver 4 MHz + 5 digital inputs per channel + 3 digital outputs per channel		1 × 34-pin MIL connector	30 mm	NX-PG0242-5	NX-PG0232-5
	4 pulse line driver 4 MHz + 5 digital inputs per channel + 3 digital outputs per channel		2 × 34-pin MIL connector	30 mm	NX-PG0342-5	NX-PG0332-5

Serial Communication Interface Units

Module type	Channels, Signal type	Performance, I/O Refresh Mode	Connection type 2 Units with screwless push-in connections are supplied with the appropriate terminal connector. Units with MIL/Fujitsu connectors are supplied without matching plugs.	Width	Order code	NPN-type 2 Order codes are for PNP-type signals (positive switching, 0 V common). Most models are also available as NPN-type (negative switching, 24 V common). Inputs of MIL-connector versions can be used as NPN or PNP.
Serial Communication	1 × RS-422A/485	Free Run	Screwless push-in (NX-TBC162)	12 mm	NX-CIF105	–
	1 × RS-232C	Free Run	Screwless push-in (NX-TBC162)	12 mm	NX-CIF101	–
	2 × RS-232C	Free Run	9-pin D-sub	30 mm	NX-CIF210	–

Analog I/O Units

Module type	Signal type	Performance, I/O Refresh Mode	Channels	Connection type 2 Units with screwless push-in connections are supplied with the appropriate terminal connector.	Width	Order code
Temperature Sensor -Input	Thermocouple type B,E,J,K,L,N,R,S,T,U,WRe5-26,PLII	0.1°C resolution, 200 ms/unit Free Run	2	Screwless push-in terminal block(s) with cold junction sensor, calibrated -individually at the factory	12 mm	NX-TS2101
		0.1°C resolution, 200 ms/unit Free Run	4		24 mm	NX-TS3101
		0.01°C resolution, 10 ms/unit Free Run	2		12 mm	NX-TS2102
		0.01°C resolution, 10 ms/unit Free Run	4		24 mm	NX-TS3102
		0.001°C resolution, 60 ms/unit Free Run	2		12 mm	NX-TS2104
		0.001°C resolution, 60 ms/unit Free Run	4		24 mm	NX-TS3104
	RTD type Pt100 (3-wire), Pt1000, Ni508.4	0.1°C resolution, 200 ms/unit Free Run	2	Screwless push-in (NX-TBA162)	12 mm	NX-TS2201
		0.1°C resolution, 200 ms/unit Free Run	4	Screwless push-in (NX-TBA162 + NX-TBB162)	24 mm	NX-TS3201
		0.01°C resolution, 10 ms/unit Free Run	2	Screwless push-in (NX-TBA162)	12 mm	NX-TS2202
		0.01°C resolution, 10 ms/unit Free Run	4	Screwless push-in (NX-TBA162 + NX-TBB162)	24 mm	NX-TS3202
		0.001°C resolution, 60 ms/unit Free Run	2	Screwless push-in (NX-TBA162)	12 mm	NX-TS2204
		0.001°C resolution, 60 ms/unit Free Run	4	Screwless push-in (NX-TBA162 + NX-TBB162)	24 mm	NX-TS3204
Analog Input	4 to 20 mA single ended	1/8000 resolution, 250 µs/channel Free Run	2	Screwless push-in (NX-TBA082)	12 mm	NX-AD2203
			4	Screwless push-in (NX-TBA122)	12 mm	NX-AD3203
			8	Screwless push-in (NX-TBA162)	12 mm	NX-AD4203
	4 to 20 mA differential	1/8000 resolution, 250 µs/channel Free Run	2	Screwless push-in (NX-TBA082)	12 mm	NX-AD2204
			4	Screwless push-in (NX-TBA122)	12 mm	NX-AD3204
			8	Screwless push-in (NX-TBA162)	12 mm	NX-AD4204
		1/30000 resolution,10 µs/channel Synchronous/Free Run	2	Screwless push-in (NX-TBA082)	12 mm	NX-AD2208
			4	Screwless push-in (NX-TBA122)	12 mm	NX-AD3208
			8	Screwless push-in (NX-TBA162)	12 mm	NX-AD4208
	–10 to 10 V single ended	1/8000 resolution, 250 µs/channel Free Run	2	Screwless push-in (NX-TBA082)	12 mm	NX-AD2603
			4	Screwless push-in (NX-TBA122)	12 mm	NX-AD3603
			8	Screwless push-in (NX-TBA162)	12 mm	NX-AD4603
	–10 to 10 V differential	1/8000 resolution, 250 µs/channel Free Run	2	Screwless push-in (NX-TBA082)	12 mm	NX-AD2604
			4	Screwless push-in (NX-TBA122)	12 mm	NX-AD3604
			8	Screwless push-in (NX-TBA162)	12 mm	NX-AD4604
		1/30000 resolution,10 µs/channel Synchronous/Free Run	2	Screwless push-in (NX-TBA082)	12 mm	NX-AD2608
			4	Screwless push-in (NX-TBA122)	12 mm	NX-AD3608
			8	Screwless push-in (NX-TBA162)	12 mm	NX-AD4608
High-Speed Analog Input	–10 to 10 V, –5 to 5 V, 0 to 10 V, 0 to 5 V, 1 to 5 V, 0 to 20 mA, 4 to 20 mA differential	–10 to 10 V or –5 to 5 V: 1/64000 Other input range: 1/32000 5 µs/channel Synchronous	4 (NPN)	Screwless push-in (NX-TBA162 + NX-TBB162)	24 mm	NX-HAD401
High-Speed Analog Input			4 (PNP)	Screwless push-in (NX-TBA162 + NX-TBB162)	24 mm	NX-HAD402
Analog Output	4 to 20 mA	1/8000 resolution, 250 µs/channel Free Run	2	Screwless push-in (NX-TBA082)	12 mm	NX-DA2203
		1/8000 resolution, 250 µs/channel Free Run	4	Screwless push-in (NX-TBA122)	12 mm	NX-DA3203
		1/30000 resolution,10 µs/channel Synchronous/Free Run	2	Screwless push-in (NX-TBA082)	12 mm	NX-DA2205
		1/30000 resolution,10 µs/channel Synchronous/Free Run	4	Screwless push-in (NX-TBA122)	12 mm	NX-DA3205
	–10 to 10 V	1/8000 resolution, 250 µs/channel Free Run	2	Screwless push-in (NX-TBA082)	12 mm	NX-DA2603
		1/8000 resolution, 250 µs/channel Free Run	4	Screwless push-in (NX-TBA122)	12 mm	NX-DA3603
		1/30000 resolution,10 µs/channel Synchronous/Free Run	2	Screwless push-in (NX-TBA082)	12 mm	NX-DA2605
		1/30000 resolution,10 µs/channel Synchronous/Free Run	4	Screwless push-in (NX-TBA122)	12 mm	NX-DA3605

Temperature control units

Module type	Conversion time, I/O Refresh Mode	Channels	Input type	Output type	Output capacity	CT Input capacity	Control type	Connection type	Width	Order code
Temperature control	50 ms Free run	2	Multi-input (Thermo- couple and Resistance thermometer)	Voltage output (for driving SSR)	2 points	2 points	Standard	Screwless push-in (NX-TBA162)	12 mm	NX-TC2405
					2 points	–	Standard			NX-TC2406
					4 points		Heating and Cooling			NX-TC2407
				Linear current output	2 points		Standard			NX-TC2408
		4		Voltage output (for driving SSR)	4 points	4 points	Standard	Screwless push-in (NX-TBA162 + NX-TBB162)	24 mm	NX-TC3405
					4 points	–	Standard			NX-TC3406
					8 points		Heating and Cooling			NX-TC3407
				Linear current output	4 points		Standard			NX-TC3408

Load cell input

Module type	Specifications	Excitation voltage/input range	I/O refresh method	Connection type 2 Units with screwless push-in connections are supplied with the appropriate terminal connector.	Width	Order code
Load cell input	1 load cell input, 125 µs conversion cycle	5 VDC ±10%/–5 to 5 mV/V	Synchronous/Free Run	Screwless push-in (NX-TBC162)	12 mm	NX-RS1201

Heater burnout detection

Module type	Channels, signal type	Control output	I/O refresh method	Connection type 2 Units with screwless push-in connections are supplied with the appropriate terminal connector.	Width	Order code
Heater burnout detection	4 CT inputs 4 control outputs	NPN, 12 to 24 VDC 0.1 A/point, 0.4 A/unit	Free Run	Screwless push-in (NX-TBA162)	12 mm	NX-HB3101
Heater burnout detection	4 CT inputs 4 control outputs	PNP 24 VDC 0.1 A/point, 0.4 A/unit	Free Run	Screwless push-in (NX-TBA162)	12 mm	NX-HB3201

Other units

Module type	Description	Connection type 2 Units with screwless push-in connections are supplied with the appropriate terminal connector.	Width	Order code
Power Unit	NX bus power supply unit, 24 V DC input, non-isolated	Screwless push-in (NX-TBC082)	12 mm	NX-PD1000
	I/O power feed unit, for separation of power groups, up to 10 A	Screwless push-in (NX-TBA082)	12 mm	NX-PF0730
	I/O power connection unit, 16 × IOV	Screwless push-in (NX-TBA162)	12 mm	NX-PC0020
	I/O power connection unit, 16 × IOG	Screwless push-in (NX-TBA162)	12 mm	NX-PC0010
	I/O power connection, 8 × IOV + 8 x IOG	Screwless push-in (NX-TBA162)	12 mm	NX-PC0030
System Units and -Accessories	Grounding terminal, 16 points	Screwless push-in (NX-TBC162)	12 mm	NX-TBX01
	End cover (included with Communication Coupler)	–	12 mm	NX-END01
	Replacement front connector with 8 wiring terminals (marked A+B)	Screwless push-in	12 mm	NX-TBA082
	Replacement front connector with 12 wiring terminals (marked A+B)	Screwless push-in	12 mm	NX-TBA122
	Replacement front connector with 16 wiring terminals (marked A+B)	Screwless push-in	12 mm	NX-TBA162
	Replacement front connector with 12 wiring terminals (marked C+D)	Screwless push-in	12 mm	NX-TBB122
	Replacement front connector with 16 wiring terminals (marked C+D)	Screwless push-in	12 mm	NX-TBB162
	Replacement front connector with 8 wiring terminals (marked A+B+FG)	Screwless push-in	12 mm	NX-TBC082
	Replacement front connector with 16 wiring terminals (marked A+B+FG)	Screwless push-in	12 mm	NX-TBC162
	DIN rail insulation spacers, set of 3 pcs		–	NX-AUX01
	30 Unit pins + 30 Terminal keying pins, to prevent mismatch of unit and terminal block (one set is enough for 10 units)		–	NX-AUX02

Recommended EtherCAT and EtherNet/IP communication cables

Item			Manufacturer	Color	Cable length (m)	Order code
EtherCAT cable	Cat 5e, AWG22, 2-pair cable M12/Smartclick connectors Improved shield for EtherCAT communications	Standard type Cable with connectors on both ends (M12 straight/M12 straight)	OMRON	Black	0.5	XS5W-T421-BM2-SS
					1	XS5W-T421-CM2-SS
					2	XS5W-T421-DM2-SS
					3	XS5W-T421-EM2-SS
					5	XS5W-T421-GM2-SS
					10	XS5W-T421-JM2-SS
		Rugged type Cable with connectors on both ends (M12 straight/RJ45)		Black	0.5	XS5W-T421-BMCSS
					1	XS5W-T421-CMC-SS
					2	XS5W-T421-DMC-SS
					3	XS5W-T421-EMC-SS
					5	XS5W-T421-GMC-SS
					10	XS5W-T421-JMC-SS
Ethernet/EtherCAT patch cable	Cat 6a, AWG27, 4-pair cable Cable sheath material: LSZH 2 The lineup features low smoke zero halogen cables for in-cabinet use and PUR cables for out-of-cabinet use. , 2 This cable is available in yellow, green and blue colors.	Standard type Cable with connectors on both ends (RJ45/RJ45)		Yellow	0.2	XS6W-6LSZH8SS20CM-Y
					0.3	XS6W-6LSZH8SS30CM-Y
					0.5	XS6W-6LSZH8SS50CM-Y
					1	XS6W-6LSZH8SS100CM-Y
					1.5	XS6W-6LSZH8SS150CM-Y
					2	XS6W-6LSZH8SS200CM-Y
					3	XS6W-6LSZH8SS300CM-Y
					5	XS6W-6LSZH8SS500CM-Y
					7.5	XS6W-6LSZH8SS750CM-Y
					10	XS6W-6LSZH8SS1000CM-Y
					15	XS6W-6LSZH8SS1500CM-Y
					20	XS6W-6LSZH8SS2000CM-Y
				Green	0.2	XS6W-6LSZH8SS20CM-G
					0.3	XS6W-6LSZH8SS30CM-G
					0.5	XS6W-6LSZH8SS50CM-G
					1	XS6W-6LSZH8SS100CM-G
					1.5	XS6W-6LSZH8SS150CM-G
					2	XS6W-6LSZH8SS200CM-G
					3	XS6W-6LSZH8SS300CM-G
					5	XS6W-6LSZH8SS500CM-G
					7.5	XS6W-6LSZH8SS750CM-G
					10	XS6W-6LSZH8SS1000CM-G
					15	XS6W-6LSZH8SS1500CM-G
					20	XS6W-6LSZH8SS2000CM-G
Ethernet/EtherCAT patch cable	Cat 5e, AWG26, 4-pair cable Cable sheath material: PUR 2 The lineup features low smoke zero halogen cables for in-cabinet use and PUR cables for out-of-cabinet use.	Standard type Cable with connectors on both ends (RJ45/RJ45)	OMRON	Green	0.5	XS6W-5PUR8SS50CM-G
					1	XS6W-5PUR8SS100CM-G
					1.5	XS6W-5PUR8SS150CM-G
					2	XS6W-5PUR8SS200CM-G
					3	XS6W-5PUR8SS300CM-G
					5	XS6W-5PUR8SS500CM-G
					7.5	XS6W-5PUR8SS750CM-G
					10	XS6W-5PUR8SS1000CM-G
					15	XS6W-5PUR8SS1500CM-G
					20	XS6W-5PUR8SS2000CM-G
	Cat 5e, AWG22, 2-pair cable	Rugged type Cable with connectors on both ends (RJ45/RJ45)		Grey	0.3	XS5W-T421-AMD-K
					0.5	XS5W-T421-BMD-K
					1	XS5W-T421-CMD-K
					2	XS5W-T421-DMD-K
					3	XS5W-T421-EMD-K
					5	XS5W-T421-GMD-K
					10	XS5W-T421-JMD-K
					15	XS5W-T421-KMD-K
		Rugged type Cable with connectors on both ends (M12 straight/RJ45)		Grey	0.3	XS5W-T421-AMC-K
					0.5	XS5W-T421-BMC-K
					1	XS5W-T421-CMC-K
					2	XS5W-T421-DMC-K
					3	XS5W-T421-EMC-K
					5	XS5W-T421-GMC-K
					10	XS5W-T421-JMC-K
					15	XS5W-T421-KMC-K
	Cat 5e, AWG22, 2-pair cable	Rugged type Cable with connectors on both ends (M12 L right angle/RJ45)	OMRON	Grey	0.3	XS5W-T422-AMC-K
					0.5	XS5W-T422-BMC-K
					1	XS5W-T422-CMC-K
					2	XS5W-T422-DMC-K
					3	XS5W-T422-EMC-K
					5	XS5W-T422-GMC-K
					10	XS5W-T422-JMC-K
					15	XS5W-T422-KMC-K
Ethernet -installation - cable	Cat 5, SF/UTP, 4 × 2 × AWG 24/1 (solid core), Polyurethane (PUR)		Weidmüller	Green	100	WM IE-5IC4x2xAWG24/1-PUR
Ethernet -installation - cable	Cat 5, SF/UTP, 4 × 2 × AWG 26/7 (stranded core), Polyurethane (PUR)			Green	100	WM IE-5IC4x2xAWG26/7-PUR
Connectors	RJ45 metallic connector For AWG22 to AWG26			–	–	WM IE-T0-RJ45-FH-BK
Connectors	RJ45 plastic connector For AWG22 to AWG24		OMRON	–	–	XS6G-T421-1
RJ45 socket	DIN-rail mount socket to terminate installation cable in the -cabinet		Weidmüller	–	–	WM IE-T0-RJ45-FJ-B

Note:

Please be careful while cable processing, for EtherCAT, connectors on both ends should be shield connected and for EtherNet/IP, connectors on only one end should be shield connected.

Accessories

Specifications			Order code
EtherCAT junction slaves	3 ports Power supply voltage: 20.4 to 28.8 VDC (24 VDC –15 to 20%) Current consumption: 0.08 A		GX-JC03
EtherCAT junction slaves	6 ports Power supply voltage: 20.4 to 28.8 VDC (24 VDC –15 to 20%) Current consumption: 0.17 A		GX-JC06
Industrial switching hubs (for EtherNet/IP and Ethernet)	Quality of Service (QoS): EtherNet/IP control data priority.Failure detection: Broadcast storm and LSI error detection 10/100 BASE-TX, Auto-Negotiation Current consumption: 0.22 A	3 ports Power supply connector included	W4S1-03B
		5 ports Power supply connector included	W4S1-05B
		5 ports Power supply connector and connector for informing error -included	W4S1-05C
SD memory card	2 GB		HMC-SD291
SD memory card	4 GB		HMC-SD491
DIN track	Length: 0.5 m; height: 7.3 mm		PFP-50N
	Length: 1 m; height: 7.3 mm		PFP-100N
	Length: 1 m; height: 16 mm		PFP-100N2
End plate to secure the units on the DIN rail			PFP-M (2 pcs)
Battery for NX/NJ CPU unit			CJ1W-BAT01
End cover	End cover for NX1 and NX1P CPU units (Provided with the CPU unit)		NX-END02
End cover	End cover for EtherCAT communication coupler unit (Provided with the EtherCAT communication coupler unit)		NX-END01

Computer software

Specifications	Order code
Sysmac Studio Lite Edition 2 Same functionality and supported devices than Sysmac Studio Standard Edition except for controller. The Lite Edition only supports the NX1, NX1P and NJ1 machine controllers. version 1.17 or higher	SYSMAC-LE____ 2 Refer to the Sysmac Studio datasheet (Cat. No. SysCat_I181E) for detailed information or contact your OMRON representative.

Software

Sysmac Studio

Sysmac Studio bietet eine integrierte Entwicklungs- und Betriebsumgebung für Konfiguration, Programmierung, Simulation und Überwachung.

Sysmac Produktportfolio

Auf einer einzigen Sysmac-Plattform haben wir Motion-Control-, Sicherheits-, E/A-, Bildverarbeitungs-, Sensorik- und Visualisierungsprodukte integriert.

Sehen Sie sich das vollständige Sysmac-Portfolio an.

Downloads

Broschüren

NX1P-L Broschüre

enPDF 10 MB

Panel Building Broschüre

dePDF 3 MB

Weitere Sprachen

Sysmac: A Fully Integrated Platform Broschüre

enPDF 10 MB

Alle anzeigen broschüren

Kataloge

Sysmac Katalog

dePDF 40 MB

Weitere Sprachen

Alle anzeigen kataloge

Dateien der Gerätebeschreibung

Omron GX-JC03 JC06 EtherCAT Junction Box EtherCAT ESI-Datei

enZIP 4 KB

Alle anzeigen dateien der gerätebeschreibung

Datenblätter

NX1P_ NX1-series Machine Controller Datenblatt

enPDF 2 MB

Alle anzeigen datenblätter

Handbücher

NJ-Series for Motion Control Kurz-Inbetriebnahme-Anleitung

enPDF 20 MB

Weitere Sprachen

NX-series NX1P2 CPU Unit Built-in I/O and Option Board Bediener-Handbuch

enPDF 6 MB

NX-series NX1P2 CPU Unit Hardware Bediener-Handbuch

enPDF 7 MB

Weitere Sprachen

NX/NJ-Series CPU Unit Built-in EtherCAT Port Bediener-Handbuch

enPDF 10 MB

NX/NJ-Series CPU Unit Built-in EtherNet/IP Port Bediener-Handbuch

enPDF 10 MB

NX/NJ-Series CPU Unit Motion Control Bediener-Handbuch

enPDF 20 MB

NX/NJ-Series CPU Unit Software Bediener-Handbuch

enPDF 20 MB

NX/NJ-Series Instructions Referenz-Handbuch

enPDF 10 MB

NX/NJ-Series Motion Control Instructions Referenz-Handbuch

enPDF 5 MB

NX/NJ-Series Troubleshooting Manual Bediener-Handbuch

enPDF 20 MB

NX1P Built-in I/O and Option Board Bediener-Handbuch

enPDF 5 MB

NX1P2_NX1Wseries Merkblatt

enPDF 500 KB

Sysmac Studio Bedienungs-Handbuch

enPDF 40 MB

Alle anzeigen handbücher

Sie haben eine Frage?

Wir helfen Ihnen gerne.

Kontaktieren Sie uns.

Abonnieren Sie unsere Produkt-Updates

Profitieren Sie von Newslettern über Produktinnovationen, Lösungen und Services.

Vielen Dank für Ihr Interesse an unseren eNews. Sie erhalten umgehend eine Email von uns mit einem Link zur Bestätigung Ihrer Newsletter-Bestellung. Dieses Vorgehen basiert aus unseren rechtlichen Hinweisen.

Es liegen zur Zeit technische Probleme vor. Ihre Übertragung war nicht erfolgreich. Entschuldigen Sie dies bitte und versuchen es später noch einmal. Details

Download

Produktdokumentation

Laden Sie sich Datenblätter, Handbücher und Broschüren herunter.

Durchsuchen Sie unser Download-Center

Schulungskurse

Bei unseren Schulungen profitieren Sie von der Kompetenz unserer besten Ingenieure. Für Anfänger bis Fortgeschrittene geeignet

Sehen Sie sich einen Schulungskurs an.

Wir verwenden Cookies, um Ihnen die bestmögliche Nutzung unserer Website bieten zu können.

Cookie-Einstellungen

login

Registrieren

Vielen Dank für die Registrierung bei Omron

direkten Zugang erhalten

Vielen Dank für Ihr Interesse

Did you know that 4 out of 5 distributors buy this product in a bundle?

Kompakte Größe, leistungsstarke Funktionen

Ordering information

NX1P series CPU units

Option boards

NX I/O units (local and remote I/O)

Communication and control units

IO-Link master unit

RFID units

Digital I/O units

Position control units

Serial Communication Interface Units

Analog I/O Units

Temperature control units

Load cell input

Heater burnout detection

Other units

Recommended EtherCAT and EtherNet/IP communication cables

Accessories

Computer software

Broschüren

Kataloge

Dateien der Gerätebeschreibung

Datenblätter

Handbücher